Contains 4 tools to quickly remove screws #4- 24 and bolts No. 10 - 3/8"
Easy to use with quick connect chucks and hand drills
Made of high speed tool steel for long life
Deep serrated edges - biting action creates greater torque helping to remove long screws
Self centering drill tip - only one tool required for extraction
Remove damaged screw heads and extract free spinning screws with GRAB-IT! No other screw extractor removes damaged heads and extracts free spinning screws! This set extracts screws easily from wood, metal or plastic and removes screws made of any alloy, including soft screws. The applications are infinite! Automobiles, toys, furniture, appliances and more!
Saved moneySeptember 20, 2008 It looked like I was going to have to replace the plastic refrigerator roof vent cover on my camper. While resealing seams on the campers roof I discovered the vent cover could not be removed because the head of one of the recessed screws securing the vent was so corroded the metal was crumbling. I thought I would have to break the vent to remove it then replace the mounting plate and vent cover - cost about $75. A contractor friend suggested I try Grabit. At first I had difficulty. The side of the bit which the directions say will burnish and make a recess in the screw head didn't do the job. So, I sank a small pilot hole with a standard drill bit and then used the removal side of the Grabit bit. It worked the first time. Now all I need is to replace the screws not the vent.
Better than expectedSeptember 8, 2008 I used this product to remove old storm windows with layers of paint on the screws. When I first received it I was leery since it is made in China. I thought it would not stand up after the first couple of screws. To my amazement it allowed me to remove about 44 screws. If you are interested in removing only the heads of screws, use a bigger size than recommended and you can do the job in one step without having to flip the bit over. Good luck on your project.
Like a champSeptember 3, 2008 I have been wanting these easy-outs for some time now, but never needed to use them. Stripped a small screw while working on my bike...that thing was like butter. Used the Alden the day I got it in the mail. Instructions were thorough...product was easy to use...screw backed out real smooth.
A++ in my books...great purchase...needs to be in everyone's toolbox
good productSeptember 1, 2008 Received a different item for Christmas last year and decided I wanted this product. This has 2 tools in one which i liked.
Its is okayAugust 8, 2008 It is ok, it works but not every time. I had removed 4 screws successfully, but had problem with one other where it didn't work that well, so I had to drill it out. Good Luck...
